Husqvarna 2011 TE 630 Workshop Manual page 65

- Remove R.H. guard (1) and L.H. guards (2) loosening the screws (3) with a
4 mm Allen wrench.
- Remove saddle and side panels as described in the relevant paragraph.
- Loosen the screws (4) securing silencers to rear chassis using an 8 mm ring
wrench on the outside and a 10 mm ring wrench on the inside.
Part. N. 8000 H2051 (02-2010)
GENERAL PROCEDURES
E.7
2
2
3
3
H006006