Crankshaft Removal - Husqvarna 2011 TE 630 Workshop Manual

- Remove the input shaft fork (6).
- Remove input shaft (7) and output shaft (8) being careful not to lose any
shims (if fitted).

Crankshaft removal

- Slide the puller (1) (part no. 8000 89743) over the right end of the cran-
kshaft.
- Secure the puller to the crankcase half and remove the crankshaft (2) from
the opposite side.
Part. N. 8000 H2051 (02-2010)
ENGINE DISASSEMBLY
F.33