Securing The Gear Sensor, Lambda Sensor, Stop Micro Switch Cables; Securing The Wiring Harness To The Rear Chassis; Securing The Wiring Harness To The Mudguard - Husqvarna 2011 TE 630 Workshop Manual

11
8
9
9
7
13
ELECTRICAL SYSTEM
• Securing the wiring harness
Strap main wiring harness to chassis with clips (6).

• Securing the gear sensor, Lambda sensor, Stop micro switch cables.

- Strap the gear sensor cable (7) to the clutch hose (8) with clips (9)
- Strap the Lambda sensor cable (10) to the wiring harness with clip (11).
14
- Strap the stop micro switch cable (12) to the battery negative cable (13)
with clip (14).
12
10
H01455

• Securing the wiring harness to the rear chassis

- Strap main wiring harness and light/turning indicator wiring harness to the
rear chassis with clips (15) (route it over the rear shock absorber).

• Securing the wiring harness to the mudguard

- Secure the number plate light wiring harness to the clip (16).
M.50 Part. N. 8000 H2051 (02-2010)