Thermal Expansion Valve Removal - Husqvarna 2011 TE 630 Workshop Manual

Thermal expansion valve removal.

- Remove saddle and tank as outlined in the relevant paragraphs.
- Drain coolant from the radiators as described in "Section D".
- Disconnect the three clamps (1), disconnect the hoses (2) from the thermal
expansion valve (3) and remove the valve.
NOTE: After refitting the thermal expansion valve, fill with coolant as outlined
in "Section D".
Part. N. 8000 H2051 (02-2010)
GENERAL PROCEDURES
E.31
1
2
1
1
2
1
3
2
H01196
3
1
2