Radiator Removal - Husqvarna 2011 TE 630 Workshop Manual

Radiator removal

- Remove the fuel tank together with scoops and spoilers as outlined in the
relevant paragraphs.
- Remove the electric cooling fan and its bracket as described in the relevant
paragraph.
- Drain all coolant as described in the relevant paragraph (see Section "D").
- Release the grids (1) and remove them.
- Loosen the clamps (2) and disconnect the hoses (3) from the left-hand radiator
(4).
- Open the clamp (6) and disconnect the hose (7).
- Disconnect the breather hose (8).
- Loosen the clamps (9) and disconnect the hoses (10) from the right-hand
radiator.
Part. N. 8000 H2051 (02-2010)
GENERAL PROCEDURES
E.37
7
6
4
2
3
H006014