Table of Contents
Advertisement
ELECTRICAL SYSTEM
Turning indicator bulb replacement
-
Loosen the screw (1) with a Phillips screwdriver.
-
Remove the lens (2)
-
Remove the bayonet-style bulb (3); push in and turn bulb to remove.
-
Once the bulb has been replaced, reverse the removal procedure to reas-
semble.
Rear turning indicator removal
-
Remove the tail light as described in the relevant paragraph
-
Detach the rubber gaiter (1) and extract the right and left turning indicator
cables with their connectors.
-
Disconnect the LH (2) and RH (3) connectors.
-
Loosen the screws (4) using an 8 mm Allen wrench on the outside and a
10 mm wrench on the inside and then remove the turning indicators (5).
M.30
Part. N. 8000 H2051 (02-2010)
Advertisement
Chapters
Table of Contents
Troubleshooting
