Number Plate Holder Removal; Rear Mudguard Removal - Husqvarna 2011 TE 630 Workshop Manual

Number plate holder removal

- Remove the tail light as described in the relevant paragraph
- Detach the rubber gaiter (1), extract the turning indicator, tail light and
number plate light cables (2) and disconnect them.
- Loosen the two screws (3) using an 8 mm Allen wrench and remove the
number plate holder (4) together with the turning indicators.

Rear mudguard removal

- Remove the tail light as described in the relevant paragraph
- Detach the rubber gaiter (1), extract the turning indicator, tail light and
number plate light cables (2) and disconnect them.
- Loosen the four screws (3) using an 8 mm Allen wrench and remove the
mudguard (4) together with the number plate holder (5).
Part. N. 8000 H2051 (02-2010)
ELECTRICAL SYSTEM
M.33
1
2
3
1
2
3
3
H01419
4
H01418
H006016
5
4
H006017