Valve Removal - Husqvarna 2011 TE 630 Workshop Manual

1
4
3
5
ENGINE DISASSEMBLY

Valve removal

- Remove the cylinder head as described in the relevant paragraph.
Remove the rocker arm spring spacers (1) using a hook.
Remove the rocker arm shaft screws (2) (6 mm Allen wrench) and then remove
rocker arm shafts (3) and rocker arms (4).
1
Mark the valves and their components so as to refit in their original posi-
H006046
tions on assembly.
H006046
2
H006047
H006048
- Remove the shims (5) using a small magnet.
H006049
F.12 Part. N. 8000 H2051 (02-2010)