Husqvarna 2011 TE 630 Workshop Manual page 391

ELECTRICAL SYSTEM
4- SPEED / TRIP 1 / RPM (figure 4)
- SPEED: speed - maximum value: 299 kmh or 299 mph;
- TRIP 1: distance - maximum value: 999.9 km or 621,31 mi (data will be lost
after disconnecting the battery).
Resetting the STP 1 also resets the TRIP 1 and AVS 1 data.
The function TRIP 1 is ON together with the function STP 1 (*).
- RPM: engine r.p.m. shown on the vertical bar indicator.
(*): see figure 5
5- SPEED / STP 1 / RPM (figure 5)
- SPEED: speed - maximum value: 299 kmh or 299mph;
- STP 1: miles/kilometres covered time
- Reading from 0:00 to 23:59:59 (data will be lost after disconnecting the
battery).
To activate the function STP 1, push the SCROLL button (A) and hold for
more than 3 seconds.
- 1st step: activate function;
- 2nd step: stop counters.
- 3rd step: reset STP 1, TRIP 1 and AVS 1 data;
- 4th step: activate function;
- 5th step: stop counters.
and so on
NOTE: STP 1 data+TRIP 1 data=AVS 1 (*).
- RPM: engine r.p.m. shown on the vertical bar indicator.
(*): see figure 6
6- SPEED / AVS 1 / RPM (figure 6)
- SPEED: speed - maximum value: 299 kmh or 299 mph;
- AVS 1: shows the average vehicle speed, according to covered distance
(TRIP 1) and time (STP1) (data will be lost after disconnecting the battery).
NOTE: Resetting the STP 1 also resets the TRIP 1 and AVS 1 data.
- RPM: engine r.p.m. shown on the vertical bar indicator.
M.40 Part. N. 8000 H2051 (02-2010)