Husqvarna 2011 TE 630 Workshop Manual page 73

- Loosen the four screws (7) of the internal mudguard (8) using an 8 mm Allen
wrench.
- Push down the internal mudguard (8) and then slide the utilities holder plate
(3) toward vehicle front to remove it.
- Loosen the two screws (9) and remove the rear brake master cylinder cover
(10).
- Loosen the screws (11) securing footpegs and rear chassis to chassis (6 mm
Allen wrench).
Part. N. 8000 H2051 (02-2010)
GENERAL PROCEDURES
E.15