Husqvarna 2011 TE 630 Workshop Manual page 427

FUEL INJECTION SYSTEM
In addition to identifying any current malfunction, the software sto-
res past malfunctions that have been resolved: store malfunctions
can be deleted following the instructions provided in the Operation
Manual.
The ECU stores the number of service hours of the engine (tolerance
range: + / - 1 hour). The first equipment ECU also stores the vehicle
identification number (VIN) and engine number (engine no.) of the
motorcycle. If ECU is replaced, the new ECU will only report engine
service hours.
NOTES
The green neutral light ONLY turns on when the ignition key is set to ON and
the right switch to RUN.
When the ignition key is turned to the ON position, the front and rear lights and
the display light up.
Left switch functions and the stop light can ONLY be selected when the engine
is running.
For fuel pump and relay inspections, see relevant paragraphs.
Set setting No.1
so as to set "Feedback Cor-
rection" to around 100%
Settings No.2 and 3: DO
NOT ALTER THESE SET-
TINGS (100%)
S.6
Part. N. 8000 H2051 (02-2010)