Headlamp Bulbs Replacement - Husqvarna 2011 TE 630 Workshop Manual

ELECTRICAL SYSTEM

Headlamp bulbs replacement

Proceed as follows to reach the headlamp bulbs:
- pull out the front fairing (1) to remove it;
- loosen the three screws (2) and remove the headlamp (3);
- detach connector (4) from the bulb;
- slide off the rubber gaiter (5);
- release the bulb holder clips (6) and take out bulb (7);
Note: Headlamp bulb (7) is of the halogen type; be careful when replacing it
since the glass part shall not be touched with bare hands.
Part. N. 8000 H2051 (02-2010) M.27