Removing The Oil Filter; Gear Position Sensor, Removing - Husqvarna FC 250 2017 Repair Manual

17.3.4

Removing the oil filter

17.3.5

gear position sensor, removing

-
Remove the oil drain plug
-
Remove oil drain plug (D with the O-ring.
-
Completely drain the engine oil.
O.
-
Remove screws Remove the oil filter cover
O-ring.
-
Pull oil filter (D out of the oil filter housing.
I
Lock ring plier (51012011000)
O.
-
Remove screws
-
Remove the protective plate and the gear position sensor .
8
with the magnet and seal ring.
8
with the
(0 p. 296)
ENGINE 17
..
..
171