Husqvarna 2011 TE 630 Workshop Manual page 389

ELECTRICAL SYSTEM
DIGITAL DASHBOARD, WARNING LIGHTS
The motorcycle is fitted with a digital instrument on which 5 warning lights are
also available: high beam lights, low beam lights (with display lighting), turning
indicators, neutral gear and fuel reserve.
1 - BLUE warning light "High beam"
2 - GREEN warning light "Low beam"
3 - GREEN warning light "Turning indicators"
4 - GREEN warning light "Neutral"
5 - ORANGE warning light "Fuel reserve"
Note:
- After engine starts, the dashboard shows the SW version for the 2 secon-
ds; after the check routine, the dashboard shows the last planned function.
- When the engine is turned off, the dashboard does not show any functions.
- To select instrument functions and reset functions, use the SCROLL button
(A)
- Available functions are listed below in the order they appear when selec-
ting them.
1 - SPEED / ODO
2 - SPEED / H
3 - SPEED / CLOCK
4 - SPEED / TRIP 1
5 - SPEED / STP 1
6 - SPEED / AVS 1
7 - SPEED / MAX SPEED
8 - SPEED / TRIP 2
9 - SPEED / TRP 2 / CLOCK
10 -SPEED / RPM (numerical value)
Note: The RPM function seen on the vertical bar indicator is ALWAYS active.
Functions of the GREEN warning light (4)"NEuTRAL" in case of
FuEL INJECTION SYSTEM malfunction (contact your local HuSQvARNA
Dealer)
a) With the GEARBOX NOT in NEuTRAL position: the warning light
FLASHES INTERMITTENTLY.
b) With the GEARBOX in NEuTRAL position: the warning light is initial-
ly constantly ON then it FLASHES TWICE IN RAPID SuCCESSION
then returns to being constantly ON. This cycle repeats itself.
After eliminating the malfunction,the warning light (4) returns to its normal
operation.
M.38 Part. N. 8000 H2051 (02-2010)