Idle Adjustment; Engine Oil Level Check - Husqvarna 2011 TE 630 Workshop Manual

Idle adjustment

Adjust the carburettor with warm engine and with the throttle control in closed
position. Proceed as follows:
- turn the idle speed adjustment screw (1) on the throttle body, located on the
right-hand side of the vehicle, until the idle speed of 1650 RPM is reached
(turn clockwise to increase the speed and anticlockwise to reduce the spe-
ed).
To do this, you need to reach the adjuster screw from airbox front end, using the
supplied 8-10 wrench, and work lengthwise with respect to the motorcycle.

Engine oil level check

Keeping the motorcycle level and upright, check the oil level through the inspec-
tion window (1) on the right crankcase.
Make sure the level is in between the MIN and MAX notches.
To top up, remove the filler cap (2).
Perform this operation with warmed-up engine
Be careful not to touch hot engine oil
Part. N. 8000 H2051 (02-2010)
SETTINGS AND ADJUSTMENTS
D.9