ENGINE DISASSEMBLY
Mesh filters on flywheel side
-
Loosen the screws (8) (8 mm wrench) and remove cover (9).
-
Extract the two mesh filters (10), wash them with petrol and blow with com-
pressed air.
-
Reassemble all parts, in the reverse order compared to disassembly. Check
cover seal for damage.
Clutch disassembly
Remove the clutch cover as described in the relevant paragraph.
-
Using an 8 mm wrench, unscrew the six screws (1) securing the clutch springs.
Remove springs, pressure plate (2) with actuator (3) bearing (4) and shim.
H006077
F.20
Part. N. 8000 H2051 (02-2010)