Gear Shift Control Assembly - Husqvarna 2011 TE 630 Workshop Manual

ENGINE REASSEMBLY

Gear shift control assembly

Install the ratchet (1) and tighten the screw (2) (13 mm wrench; 28 N/m; 2.8
Kgm; 20.65 ft/lb).
Engage the spring (3) with the suitable pin.
Install the selector drum (4) making sure the tab (5) locates in the recess (6) and
secure drum with its screw (7). (Apply Loctite 243, tighten to 28 Nm; 2.8 Kgm;
20.65 ft/lb using a 12 mm wrench).
H.24 Part. N. 8000 H2051 (02-2010)