Number Plate Light Removal - Husqvarna 2011 TE 630 Workshop Manual

ELECTRICAL SYSTEM

Number plate light removal

- Remove the tail light as described in the relevant paragraph
- Detach the rubber gaiter (1) and extract the turning indicator and number
plate cables.
- Disconnect the two connectors (2).
- Use a 4 mm Allen wrench on the outside and an 8 mm ring wrench on the
inside to loosen the screw (3), remove the tail light (4) and extract the bulb
(5) together with its bulb holder.
Once the bulb has been replaced, reverse the above procedure to reassem-
ble.
M.32 Part. N. 8000 H2051 (02-2010)