• Securing the dashboard bracket connectors
Secure dashboard connector (35) and diagnostic connector (36) using the
suitable clip. Fit the cap to the diagnostic connector (36).
• Headlamp, front turning indicators, STOP light connection
Connect the headlamp unit to the matching connector.
Connect the connectors (39) to the turning indicators.
Connect the connector (40) to the front brake lever.
Connect the connector (37) to the speed sensor.
CABLE ROuTING
• Routing of steering head tube wiring
- Route the main wiring harness cables (1) on the left of the steering head
tube into clip (2).
- Route the main wiring harness cables (3) on the right of the steering head
tube and secure them with clip (4).
- Route the cables (5) over the bottom yoke.
Part. N. 8000 H2051 (02-2010)
ELECTRICAL SYSTEM
M.49