Tyres; Electrical Components Location - Husqvarna 2011 TE 630 Workshop Manual

Tyres

Front
(TE) ..................................................................................................... 90/90x21"
(SMS) ............................................................................................... 120/70x17"
Rear
(TE) ................................................................................................... 140/80x18"
(SMS) ............................................................................................... 150/60x17"
Cold tyre pressure (TE)
Front
Rider only ..........................................................................................1.2 Kg/cm
Rider and passenger ........................................................................1.5 Kg/cm
Rear
Rider only ..........................................................................................1.5 Kg/cm
Rider and passenger ........................................................................1.8 Kg/cm
Cold tyre pressure (SMS)
Front
Rider only ..........................................................................................1.8 Kg/cm
Rider and passenger .........................................................................2.0 Kg/cm
Rear
Rider only ..........................................................................................2.0 Kg/cm
Rider and passenger .........................................................................2.2 Kg/cm

ELECTRICAL COMPONENTS LOCATION

The ignition system includes the following elements:
- Generator on the inner side of L.H. crankcase half cover;
- Electronic ignition coil under the fuel tank;
- Electronic control unit under the saddle;
- Voltage regulator on the R.H. side of the rear chassis;
- Spark plug on the R.H. side of the cylinder head;
- 12V-700W starter motor behind the engine cylinder;
- Solenoid starter located on the fuse holder plate, under the saddle;
- M.A.Q.S. sensor (pressure, throttle position, air temperature) on throttle body.
The electrical system includes the following elements:
- 12V-14Ah battery under the saddle;
- Turning indicators flasher located on the utilities holder plate, under the saddle;
- Relays located on the utilities holder plate, under the saddle;
- Electric fan relay;
- Injector, Lambda sensor, fuel pump, coil relay;
- Horn, turning indicators, stop lights, low and high beam lights relay;
- Electric fan;
- Fuses located on the utilities holder plate, under the saddle;
- Fuse FP- 15A (cable sheath marked "P"): fuel pump, HT coil, lambda sensor heater, injector;
- Fuse FM- 15A (cable sheath marked "M"): 12V depending on ignition switch, (system voltage), parking lights;
- Fuse FDC- 20A (cable sheath marked "DC"): electric fan, rear stop light, high beam, low beam, turning indicators, horn, instru-
ment panel power supply (instrument functions display).
- Rollover sensor (SMS) located on the utilities holder plate, under the saddle;
- Coolant temperature sensor;
- Lambda sensor;
- Headlamp with 12V-60/55W twin halogen bulb and 12V-5W parking light bulb;
- LED tail light;
- 12V-10W turning indicator bulbs;
- Fuel pump inside the fuel tank.
Part. N. 8000 H2051 (02-2010)
GENERAL INFORMATION
A.5
2
2
2
2
2
2
2
2