Air Box Removal - Husqvarna 2011 TE 630 Workshop Manual

GENERAL PROCEDURES

Air box removal

- Remove saddle, right-hand side panel and tank as outlined in the relevant
paragraphs.
- Loosen the upper locking nut (1) using a 12 mm ring wrench.
- Loosen the lower screw (2) securing air box to chassis using an 8 mm ring
wrench.
- Remove the hose (3) connecting filter to head.
- Move to the left side of the motorcycle and loosen clamp (4) that secures
filter to throttle body; use a 7 mm ring wrench.
E.10 Part. N. 8000 H2051 (02-2010)