Husqvarna 2011 TE 630 Workshop Manual page 52

-
+
3
SETTINGS AND ADJUSTMENTS
Shock absorber damping adjustment
Adjustment of the compression stroke is independent from the rebound stro-
ke.
A) COMPRESSION - Standard setting:
1) Low damping speed:
fully open
(adjuster 1)
2) High damping speed:
fully open
(adjuster 2)
To reset the standard setting, turn upper adjuster screws (1) and (2) clockwise
until reaching fully closed position. Then turn them back the number of clicks
specified above.
In order to obtain a smooth braking action, turn the adjuster screws counter
clockwise. Vice versa to obtain a harder braking action.
B) REBOUND - Standard setting:
TE: -20 clicks (± 2 clicks)
SMS: -26 clicks (± 2 clicks)
To reset the standard setting, turn lower adjuster (3) clockwise until reaching
fully closed position. Then turn it back by the mentioned clicks.
In order to obtain a smooth braking action, turn the adjuster screw counter
clockwise. Vice versa to obtain a harder braking action.
D.26 Part. N. 8000 H2051 (02-2010)