[10.L3] Change From Reverse To Forward Rotation; [10.M]Bottle Holder; [10.N] Retrofitting Userterminal; [10.O] Monitor / Laptop Arm - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Hide thumbs Also See for 150/50 locomotion de med:
Table of Contents

Advertisement

Change from reverse to forward rotation
[10.L3]
N
Turn the key-operated switch and start the machine without a subject on the running belt only when the belt is
not moving.
N
Observe the belt position for 2 minutes and correct the belt position with the belt adjustment screw (see
chapter maintenance and belt adjustment). It is normal, that after changing the belt rotation, the belt will move
to one side and therefore the running belt needs to be readjusted.
N
Once the belt is readjusted, STOP the belt and operate the machine with the subject on the belt.
In most cases the readjustment of the running belt requires the same revolutions of the belt adjustment screw.
Therefore we recommend to note the required revolutions of the belt adjustment screw. This will help to avoid the
waiting time and can reduce the belt adjustment procedure to some seconds effort.
Bottle holder
[10.M]
The bottle holder is available for all h/p/cosmos running machines and
can be easily fixed with a clamp on the handrail. The position of the
bottle holder must not be at the rear end of the handrail due to this end
must be reachable for the subject.
bottle holder for handrail 60mm [cos11020]
Retrofitting UserTerminal
[10.N]
All lt-models can be retro-fitted with a UserTerminal. h/p/cosmos
oversized running machines, which are equipped with an external control
unit, can be complemented optionally with an additional UserTerminal at
the handrail.
In this case the external UserTerminal is connected via interface to the
running machine. To connect other devices, e.g. PC or ECG, an
additional interface at the running machine is necessary.
Retrofitting UserTerminal [cos00098110047]
Mounting for retro-fitting UserTerminal at handrail [cos13514]
Monitor / laptop arm
[10.O]
A movable monitor and laptop arm for the external control unit
of the oversize running machines h/p/cosmos saturn and
h/p/cosmos venus is optionally available. Using this arm, the
monitor also can be turned in the field of vision of the athlete or
patient.
Monitor arm (movable) for PC monitor or Laptop
[cos13321]
Laptop computer [cos13476]
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
accessories & options
created 01.09.2008
printed 08.10.2008
page: 149 of 176

Advertisement

Table of Contents
loading

This manual is also suitable for:

MercuryQuasarPulsarStellarStratosVenus ... Show all

Table of Contents