[7.B] Immediate Maintenance; [7.C] Regular Inspections/Examinations; [7.C1] Visual Inspections - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Immediate maintenance
[7.B]
Immediate maintenance is necessary if:
N
the device has been under high mechanical stress (push, power supply cable and/or interface cable defect through
driving over it or pulling it)
N
fluid has got into the device
N
cable and/or connector plug have been damaged
N
coverings and/or safety warnings have fallen off
N
connections made of rubber show cracks (mainly the running belt and the drive belt)
N
the running belt does not run concentric
N
the running belt is not lubricated well
N
a defekt or malfunction of the device has been detected or is suspected
Only a properly and regularly serviced device is safe. The maintenance of the devices has to be performed by the
service engineers authorized by h/p/cosmos, preferrably within the scope of a maintenance contract.
Regular inspections/examinations
[7.C]
For use in sports and medical areas as well as for private, public and military
applications refer to the date at the inspection sticker at your device.
To keep the condition of the device in due order, examinations have to be performed
repeatedly according to the local laws and requirements in your country (e.g. in
Germany based on BGV A3, regulations for prevention of accidents as well as safety
requirement inspections in accordance with MDD Medical Device Directive, etc.).
For h/p/cosmos sports and medical running machines and ladder ergometers a maintenance interval respectively
technical safety checks of one year has been set. These examinations are only to be performed by trained and
authorized electric technicians.
The main inspection sticker on the device (e.g. running machine) certifies also the inspection of the optional equipment
and the accessories. However, inspection intervals for optional equipment and accessories (e.g. rope of h/p/cosmos
airwalk unweighting system, chest belt for safety harness, compressors, etc.) can deviate significantly from inspection
intervals of the main device. Read respective manuals for details.
For all required measurements and control steps consider also local requirements in your country and see
detailed instruction and protocol form order no. [cos11690xx].
Additionally to local requirements following examinations are to be performed and are to be documented in the detailed
instruction and protocol form order no. [cos11690xx]:
Visual inspections
[7.C1]
N
Visual inspection for damages at device and complete accessories. Internal space, engine compartment,
connecting lead and the right position of the tensile relief and plug, ground wire connections, etc.
N
Visual inspection of mechanics and wearing parts: driving belt, tension roller, running belt, lifting element with
fixing bolts, welding seams at the frame, tight fitting of all screws and nuts. Pay attention to the appropriate
maintenance list.
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
maintenance & safety inspections
created 01.09.2008 printed 08.10.2008 page: 100 of 176