[5.B16] Programing Example: Ukk Walk Test - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Programing example: UKK walk test
[5.B16]
Attention: Before start of the UKK walk test it is important to do some warm up exercise and you must have
already found your personal maximum walk-speed.
Initiation: running machine is in standby mode. ~ LED mode is flashing.
Step no. Activity
[5.B16]
[01] Select Mode Test
[02] Confirm Mode Test
[03] Confirm test program no 1
UKK walk test
[04] Select female
[05] Confirm female
[06] Select age 30 years
[07] Confirm 30 years
[08] Select weight 55 Kg
[09] Confirm 55 Kg
[10] Select height 170 cm
[11] Confirm 170 cm
[12] Select personal max. walking-
speed
© 2008 h/p/cosmos sports & medical gmbh
Keys
a
or
c
c
a
or
c
a
or
c
a
or
c
a
or
c
a
or
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Response / Display
d
Selection of mode (manual, profile, cardio, test)
~
until test is flashing
$
indicates program no. "Pr. 1 " is flashing
~
Sex is glowing
%
indicates sex: "M" (male) flashing
~
d
Sex is glowing
%
indicates sex: "F" (female) flashing
~
Age is glowing
%
indicates age: "35" flashing
~
d
Age is glowing
%
indicates age: "30" flashing
~
Weight is glowing
%
indicates weight: "65" flashing
~
d
Weight is glowing
%
indicates weight: "55" flashing
%
indicates height: "H175" flashing
d
%
indicates height: "H170" flashing
The running-machine starts
=
indicates speed: "0.0" flashing
d
%
indicates indicates present heart rate
All other displays also indicate the present parameters.
%
In case indicates: "P 0" flashing and at the same
time an acoustic signal appears, the running machine
cannot receive the heart rate of the subject. Check chest
belt system.
created 01.09.2008 printed 08.10.2008
operation
page: 69 of 176