h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual page 84

OP04 Maximum speed for reverse belt rotation
[6.B1]
(This option is only available for
treadmills, not for a ladder-ergometer).
OP05 Maximum Speed
OP06 Maximum acceleration time in seconds
(This option is only available for
treadmills, not for a ladder-ergometer).
OP07 Maximum Elevation
(This option is only available for
treadmills, not for a ladder-ergometer).
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Due to safety reasons, all treadmill models with a motor hood or a
crossbar handrail the speed must be limited to maximum speed of 5
km/h while using belt rotation since they have an "obstacle" (motor
hood or cross-bar handrail) at the back of the subject during this mode.
Changing this speed limitation for these models is only allowed if the
safety of the runner is guaranteed (e.g. with a safety harness).
=
indicates: Maximum speed for reverse belt rotation.
Adjustable from 1 km/h to maximum treadmill speed.
~ selected unit is blinking
~ max. is blinking
According to the selected device type (in OPTION 03) the standard
maximum speed will be indicated in the SPEED Display.
Example: h/p/cosmos mercury 4.0 = 22.0 km/h; h-p-cosmos discovery
4.0 = 40 m/min
For safety purposes (e.g. for beginners) the max. speed of every
treadmill model can be limited.
=
indicates: Maximum Speed
Adjustable from 1 km/h to maximum treadmill speed
~ selected unit is blinking
~
max. is blinking
§
reports e.g. 131 (max. acceleration increment)
$
reports e.g. 5.0 (max. acceleration time in seconds.)
%
indicates: SEC.
According to the selected device type (in OPTION 03) the standard
maximum elevation will be indicated.
Example: h/p/cosmos mercury = 25 %
For safety purposes (e.g. for beginners, or in case the height of the
room's ceiling is not enough when using an arch construction with
safety harness) the max. elevation of every treadmill model can be
limited.
$
reports: maximum elevation
Adjustable from 0 to maximum treadmill elevation
created 01.09.2008 printed 08.10.2008
optional settings
page: 84 of 176