[8.I] Error Messages / Error Codes; [8.I1] Devices With Userterminal - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Error messages / Error codes
[8.I]
Interferences and error codes might be caused by problems with the power supply or because of not enough
maintenance (lubrication of the running surface, etc.).
N
Check voltage supply. Do not use extension cords or multi-way connectors. Connect the machine direct to the
socket in the wall. Each machine should have an individual circuit.
N
Check mechanical parts for any malfunction. Check also for towels or other things, which might interfere the drive
system.
N
Check if any light barrier are dusty or not correctly adjusted.
N
Check lubrication of the running belt and lubricate if required.
N
Also contact problems at connectors (loose connections) caused by vibrations can result in malfunctions. So
please check cables and connectors for loose connections.
The device has a self-diagnosis which recognizes some errors and shows their error messages on the display of the
MCU UserTerminal (operating terminal) or the frequency changer / inverter (inside the device).
Devices with UserTerminal
[8.I1]
Start: Running belt is not moving. One of the mode LED ~ of operation is flashing: (manual, profile, cardio, test)
Message Description
[8.I1]
E01 Oil interval due
E02 Service interval due
or
Safety inspection due
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Explanation / Display / Activity
= !
„E 01" „OIL" flashing
§ $ %
„HELP" flashing
Running machine is still functioning
N
Every 1000 km (interval is adjustable) lubrication service is
due. See chapter "lubrication of the running belt". Lubricate the
belt.
N
Attention: Running machine has no sensor for oil. Lubrication
only according to operation manual. Error message does not
disappear automatically.
N
Set back error message (option 01)
= !
„E 02" „Service" flashing
§ $ %
„HELP" flashing
Running machine is still functioning
N
Every 5000 km (interval is adjustable) a general service
(interior cleansing, checking the driving belt, running belt, etc.)
is due.
N
Every 12 months a electric saftey inspection is due. See
chapter maintenance in this manual.
N
Contact authorized service engineer
N
Set back error message (option 01)
created 01.09.2008 printed 08.10.2008
trouble shooting
page: 122 of 176