[4.A2] Transport With Trolleys; [4.A3] Transport Of Oversize Running Machines; [4.B] Mechanical Installation - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Transport with trolleys
[4.A2]
For an easy transport put 2 usual trolleys under the device (platform
approximately 30cm x 30cm with 4 maneuverable rolls each) to make the
device "mobile".
Trolley with 4 rolls for max. 300kg [cos13016]
Trolley with 4 rolls for max. 500kg [cos13672]
Transport of oversize running machines
[4.A3]
For big devices it might be the best and only possibility to move them through the window with the help of a special
basket and a heavy mobile crane.
Transports of heavy devices must only be carried out by authorised staff in compliance with
the safety standards. Otherwise there is serious danger for people and devices.
Mechanical installation
[4.B]
N
In order to ensure proper installation and safety, either the manufacturer, an authorised service crew or an
authorised dealer must always perform transport and installation of the devices
N
For reasons of safety please make sure that there is a safety zone of at least L: 2.5m x W: 1.0m behind and
L: 1.0m x B: 1.0m to the front the running machine. Please note, that with the optional equipment reversible
running belt rotation you also have to ensure a safety zone of L: 2.5m x W: 1.0m in front of the running machine.
N
Put an aerobic mat (or something similar) in front of and behind the running machine to protect the subject when
falling. Put the device on a rubber mat as large as the device to protect the floor from dust and scratches, to
ensure a firm stand and to reduce noise.
N
The provided space for the running machine must be even and horizontal.
N
Models with leveling sockets (adjustable "feet") at the rear of the running machine have to be adjusted so that they
have a firm stand, otherwise it could lead to noises like knocking or rattling during the training. Check the weight
load pressure on the leveling sockets (weight of the running machine at the rear), by trying to lift the frame off the
ground at the rear of the running machine one side after the other. That way you can find out, whether you have
got the same load on the two sockets. The levelling sockets and the front wheels of the elevation system may
cause a print in the flooring. In case of sensitive flooring please use h/p/cosmos floor mats for protection:
Floor protection mat 150/50 for running machines with deck size 150x50 cm [cos14005]
Floor protection mat 170/65 for running machines with deck size 170x65 cm [cos14042]
Floor protection mat 190/65 for running machines with deck size 190x65 cm [cos14043]
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
installation & commissioning
created 01.09.2008 printed 08.10.2008 page: 24 of 176