[5.B18] Possibilities Of Interfering In Test Mode Manually - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Possibilities of interfering in test mode manually
[5.B18]
Initiation: Operational mode: test, running-belt is moving.
Step no. Activity
[5.B18]
[01] Alteration of speed
[02] Alteration of elevation
Not activated in every test
[03] Alteration of acceleration level
(only during increase or
decrease of speed)
[04] Switch over to the next program
step or one program step back
(not activated in every test).
[05] Switch over to the next mode or
one mode back
(not activated in every test)
For a better documentation we recommend to use a printer linked to the serial interface RS 232 or/and to use an external PC
with the Software h/p/cosmos para graphics
© 2008 h/p/cosmos sports & medical gmbh
Keys
a
or
press and hold
f
or
press and hold
Press several times
c
c
and simultaneous
e
or
c
and simultaneous
a
or
®
.
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Response / Display
d
Speed is being increased / reduced (0-max.) as long as
key get pressed. If SPEED is being reduced down to „0"
= PAUSE-position:
=
indicates: PAUS. Current values will be
sustained. Only valid for the actual program step, no
alteration in the memory. Next program step as in the
profile defined.
e
Elevation is being increased / reduced (0-max.) as long
as key get pressed. Only valid for the actual program
step, no alteration in the memory. Next program step as
in the profile definied.
Example: For acceleration or deceleration level "3",
press 3 times the corresponding key and then hold.
Note: Maximum 7 levels, limited by the maximum
acceleration level selected in the Optional Mode /
standard value = 4. During deceleration this function
alternates the degree of deceleration.
Jump over to the next program step or jump to the
previous program step
f
Jump over to the next mode or to the previous mode.
This is a perfect way to change from test mode to
manual mode (cool down) without stop of the belt.
d
created 01.09.2008 printed 08.10.2008
operation
page: 74 of 176