h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual page 78

OP16 Request for body weight before manual
[6.A2]
or automatic start
OP17 Unit for energy consumption
OP18 Maximum speed in Cardio mode (default
value)
(this option is only available for treadmill-
ergometers, not for ladder-ergometers)
OP19 Setting of sender for polar W:I:N:D:
system
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
0 = OFF. Request for body weight before starting a program is not
required. Calculation of energy consumption and power is based on
the body weight entered in option no 15.
1 = ON. Input of body weight before starting a program is required.
Calculation of energy consumption and power is based on the entered
body weight.
JOUL = kJoule is the unit for energy consumption
CALO = kcal is the unit for energy consumption
=
reports: 0.0 ... max
for the default value for maximum speed in the Cardio mode.
~
adjusted unit is blinking
~
max. is blinking
The value of max. speed in Cardio mode can be changed online by
pressing d a
0000 0000 = all senders are accepted (can also be set with UP
and DOWN)
xxxx xxxx = only specific sender with special ID is accepted
(must be set with d and a)
9999 9999 = next sender will be accepted, saved and filtered
(can also be set with UP and DOWN)
(further settings in user OP23 and administrator OP16 are necessary)
created 01.09.2008 printed 08.10.2008
optional settings
page: 78 of 176