h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual page 93

OP89
System for elevation measurement
[6.B1]
(option not relevant for treadmills without
elevation or ladder ergometers)
Note:
Normally the correct system for elevation
measurement is set by selecting the
correct device type (administrator option
number 3). Only in very few cases and
for special models this option is needed.
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
The following kinds of elevation measurement can be selected:
N
0 = no elevation available.
N
1 = elevation control: increment disc with light barrier 60 incr. per
motor rotation or hall effect sensor with 60 incr. per motor
rotation: elevation element with a 4 mm spindle for: 0 - 25%
elevation, ( models QUASAR/PULSAR from 1991 to 2001)
N
2 = elevation control: increment disc with light barrier 60 incr. per
motor rotation or hall effect sensor with 60 incr. per motor
rotation: elevation element with a 5 mm spindle for: 0 - 25%
elevation, ( model h/p/cosmos saturn since 1994)
N
3 = elevation control: increment disc with light barrier 60 incr. per
motor rotation or hall effect sensor with 60 incr. per motor
rotation: elevation element with a 5 mm spindle for: 0 - 35%
elevation, ( models h/p/cosmos venus since 1997)
N
4 = elevation control: linear motor for 0 - 24% elevation,
increment sensor, lift range 240 mm (h/p/cosmos mercury
models since 1997)
N
5 = elevation control: linear motor for 0 - 28% elevation,
increment sensor, lift range 300 mm (h/p/cosmos quasar 4.0
since 2002)
N
6 = elevation control: linear motor for 0 - 25% elevation,
increment sensor, lift range 300 mm (h/p/cosmos pulsar 4.0
since 2002)
N
7 = Hydraulic-cylinder for 0 - 11 % elevation angle.
lift range 430 mm (series PLM Mustang 2200)
N
8 = Hydraulic-cylinder for 0 - 11 % elevation angle.
lift range 302 mm (series PLM Trainer)
N
9 = linear motor „HN" + lifting arm. 0 - 25% elevation angle.
lift range 252 mm (h/p/cosmos mercury since 2007)
N
10 = linear motor „HN" + lifting arm. -10...+18% elevation angle.
lift range 300 mm (h/p/cosmos quasar since 2007)
N
11 = linear motor „HN" + lifting arm. -10...+15% elevation angle.
lift range 300 mm (h/p/cosmos pulsar since 2007)
N
12 = increment disc with light barrier or inductive sensor
60 incr. per motor rotation: elevation element with 8mm spindle.
-4...25 % elevation
(series h/p/cosmos saturn 450/300rs as of 2008)
created 01.09.2008 printed 08.10.2008
optional settings
page: 93 of 176