[6.B] Administrator Options; [6.B1] List Of The Administrator Options - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Administrator options
[6.B]
The administrator options are only accessible by h/p/cosmos staff and authorised service engineers. The access is only
possible with a special code which is not depicted here.
Changing an administrator option might cause serious problems if you are not familiar with all the details. Therefore the
h/p/cosmos service has to be contacted before doing any changes in the administrator options.
For optional settings on devices without UserTerminal an external UserTerminal or a connected PC with the software
h/p/cosmos para control is required.
List of the administrator options
[6.B1]
Option Description
[6.B1]
OP01 Set back of error messages E 20, E 21,
E 30, E 31, E 32, E 41, E 50 and E 51
OP02 Selection of the OEM-Code
OP03 Selection of device type
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Comment / Display
The required maintenance work has to be performed before deleting
error messages. Confirmation in the display § with "donE"
This option only sets back the error message. If the error still exists,
the error message will appear again
By selecting the OEM code the functions and settings of the
UserTerminal will be adapted to the requirements of the listed OEM
partner.
Following OEM codes can be selected:
0 = h/p/cosmos (Standard)
1 = JAEGER / VIASYS / CARDINAL HEALTH
2 = Ergo-Fit (1997-98)
3 = Proxomed / Kardiomed
4 = KISTLER Gaitway
6 = COSMED
9 = SCHILLER
Not all companies listed above are or were OEM partners of
h/p/cosmos.
Selection of the correct treadmill device type according to the „list of
device types" in the appendix. On the ladder-ergometer only the device
type 0.1 and 1.1 can be confirmed..
Note: Selection and confirmation of a device type sets back all user-
and administrator options to default.
created 01.09.2008 printed 08.10.2008
optional settings
page: 83 of 176