[6.B2] Standard Settings Of Administrator Options - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Standard settings of administrator options
[6.B2]
Option Description
[6.B2]
OP 01 Set back of error messages E 20, E 21,
E 30, E 31, E 32, E 41, E 50 and E 51
OP 02 OEM-Code
OP 03 Selection of device type
- see list [6.B3] -
OP 04 Maximum speed for reverse belt rotation depending on the device type in
OP 05 Maximum Speed
OP06 Max. acceleration time in seconds
OP 07 Maximum Elevation
OP 08 Heart Rate Display Interval
OP 09 Display Test for all displays
OP 10 Enter the serial number of the device
OP 11 Activating and de-activating speed
measurement
OP 12 Setting of allowance for speed-signal-
comparison
(Measurement / Control)
OP13 Motor brake
OP 14 Maximum acceleration time for RS232
OP 16 Activating and de-activating heart rate
measurement
OP 33 Distance between rungs (only for ladder
ergometer)
OP 34 Manual Speed Calibration
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Standard setting
depending on the model
depending on the model
OP03
depending on the device type in
OP03
Increment 131 = 5 sec.
depending on the device type in
OP03
0 = beat to beat
300...
depending on the device type in
OP03
6 %
This value does not reflect the
speed accuracy of the running-
belt.
OFF
Increment 131 = 5 sec
(depending on the model)
254 = 25.4 cm
(depending on the device type;
OP 03)
created 01.09.2008 printed 08.10.2008
optional settings
Adjustable Range
0 = h/p/cosmos (Standard)
1 = JAEGER / VIASYS /
Cardinal Health
2 = Ergo-Fit (1997-98)
3 = Proxomed / Kardiomed
4 = KISTLER Gaitway
6 = COSMED
9 = SCHILLER
(depending on the model)
1.0 km/h .... max. speed
1.0 km/h .... max. speed
Increments: 255 ... 1
Seconds: 2.6 ... 655.4
0 .... max. elevation
0 or 1 ... 9 seconds
12-digit serial number
0 = without speed measurement
1 = with speed measurement
0 = no comparison
6 = 6 % deviation allowed
8 = 8 % deviation allowed
10 = 10 % deviation allowed
OFF = not active
ON = active
Increments: 255 ... 1
Seconds: 2.6 ... 655.4
0 = HF measurement de-activated
1 = HF measurement activated,
HFU1 + RE06REC
2 = HF measurement activated,
HFUi;
auto = autom. detection
Distance between rungs in 0.1 cm
Range from: 0 to 65535
page: 96 of 176