[6.] Optional Settings; [6.A] Settings Of Control And Display Options; [6.A1] Select User Options - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Optional settings
[6.]
Settings of control and display options
[6.A]
Optional settings serve for example as an acknowledgement of error notes on the display, or for the standard setting of
the device: selection of RS232 interface protocol, etc.
Remark for devices without UserTerminal: For optional settings on devices without UserTerminal an external
UserTerminal or a connected PC with the software h/p/cosmos para control
Select user options
[6.A1]
Initiation: running belt is not moving. One of the modes LED ~ is flashing: (manual, profile, cardio, test)
Step no. Activity
[6.A1]
[01] Select option mode (OPxx) for
users – the option mode for
administrators is only accessible
for authorised service
technicians, not for users
[02] Select option no.
[03] Confirm option no.
Example: OP 01 (OIL & other
error codes): Confirmation &
deleting by pressing:
Example: OP 02 (Distance /
km): Confirmation by pressing
Example: OP 08
(STOP-time/ "slow-down-time"):
a)
b)
Keys
a
and simultaneuosly
d
and simultaneuosly
b
for at least 3
seconds.
a
c
c
c
a)
change value by pressing
b)
confirm value by pressing
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
© 2008 h/p/cosmos sports & medical gmbh
®
Response / Display
=
indicates: OP 01 flashing (for option no. 01)
!
and
d
=
indicates: OP 01 ... OP 53 flashing (for option no.
or
01 ... 53)
!
and
option, e.g.: E.rE SEt (for Error reset)
Read, confirm and set options according to the following
option list. All adjustable values are going to be shown
flashing. All non-adjustable values are not going to be
shown flashing.
Display indicates: donE (confirmation)
a d
or
c
email@h-p-cosmos.com created 01.09.2008
optional settings
is required.
"
indicating: E.rE SEt (for error reset)
"
indicate: a short explanation of the
printed 08.10.2008 page: 75 of 176