Table of Contents
Advertisement
Page 6
Installation
Usage
S1D13706
X31B-B-001-03
Create a directory for 13706cfg.exe and the S1D13706 utilities. Copy the files
13706cfg.exe and panels.def to that directory. Panels.def contains configuration infor-
mation for a number of panels and must reside in the same directory as 13706cfg.exe.
13706CFG can be started from the Windows desktop or from a Windows command
prompt.
To start 13706CFG from the Windows desktop, double click the program icon or the link
icon if one was created during installation.
To start 13706CFG from a Windows command prompt, change to the directory
13706cfg.exe was installed to and type the command 13706cfg.
The basic procedure for using 13706CFG is:
1. Start 13706CFG as described above.
2. Open an existing file to serve as a starting reference point (this step is optional).
3. Modify the configuration. For specific information on editing the configuration, see
"13706CFG Configuration Tabs" on page 7.
4. Save the new configuration. The configuration information can be saved in two ways;
as an ASCII text file or by modifying the executable image on disk.
Several ASCII text file formats are supported. Most are formatted C header files used
to build display drivers or standalone applications.
Utility files based on the Hardware Abstraction Layer (HAL) can be modified directly
by 13706CFG.
Epson Research and Development
Vancouver Design Center
13706CFG Configuration Program
Issue Date: 01/03/29
Advertisement
Chapters
Table of Contents
