Epson S1D13706 Technical Manual page 290

Page 6
13706SHOW Examples
Using 13706SHOW For Demonstration
S1D13706
X31B-B-002-03
13706SHOW is designed to demonstrate and test some of the features of the S1D13706.
The following examples show how to use the program in both instances.
1. To show color patterns which must be manually stepped through, type the following:
13706SHOW
The program displays the default color depth as selected by 13706CFG. Press any key
to go to the next screen. Once all screens are shown the program exits. To exit the pro-
gram immediately press the Esc key.
2. To show color patterns which automatically step through, type the following:
13706SHOW /a
The program displays the default color depth as selected by 13706CFG. Each screen
is shown for approximately 1 second before the next screen is automatically shown.
The program exits after the last screen is shown. To exit the
program immediately press CTRL+BREAK.
3. To show a color pattern for a specific color depth, type the following:
13706SHOW b=[mode]
where:
mode = 1, 2, 4, 8, or 16
The program displays the requested color depth and then exits.
Note
If a monochrome LCD panel is used, the image is formed using only the green
component of the Look-Up Table for 1, 2, 4 and 8 bpp color depths. For 16 bpp color
depths the green component of the pixel value is used.
4. To show the color patterns in SwivelView 90° mode, type the following:
13706SHOW /r90
The program displays the default color depth as selected by 13706CFG. Press any key
to go to the next screen. To exit the program immediately press the Esc key.
The "/r90", "/r180", and "/r270" switches can be used in combination with other com-
mand line switches.
Epson Research and Development
Vancouver Design Center
13706SHOW Demonstration Program
Issue Date: 01/02/23