Epson S1D13706 Technical Manual page 315

Epson Research and Development
Vancouver Design Center
Windows® CE 2.x Display Drivers
Issue Date: 01/05/25
7. Edit the file x:\wince\platform\cepc\drivers\display\dirs and add S1D13706 into the
list of directories.
8. Edit the file PLATFORM.BIB (located in x:\wince\platform\cepc\files) to set the de-
fault display driver to the file EPSON.DLL (EPSON.DLL will be created during the
build in step 13).
Replace or comment out the following lines in PLATFORM.BIB:
IF CEPC_DDI_VGA2BPP
ddi.dll
ENDIF
IF CEPC_DDI_VGA8BPP
ddi.dll
ENDIF
IF CEPC_DDI_VGA2BPP !
IF CEPC_DDI_VGA8BPP !
ddi.dll
ENDIF
ENDIF
with this line:
ddi.dll
9. The file MODE0.H (located in x:\wince\platform\cepc\drivers\display\S1D13706)
contains the register values required to set the screen resolution, color depth (bpp),
display type, active display (LCD/CRT/TV), display rotation, etc.
Before building the display driver, refer to the descriptions in the file MODE0.H for
the default settings of the driver. If the default does not match the configuration you
are building for then MODE0.H will have to be regenerated with the correct informa-
tion.
Use the program 13706CFG to generate the header file. For information on how to use
13706CFG, refer to the 13706CFG Configuration Program User Manual, document
number X31B-B-001-xx, available at www.erd.epson.com
After selecting the desired configuration, export the file as a "C Header File for
S1D13706 WinCE Drivers". Save the new configuration as MODE0.H in
x:\wince\platform\cepc\drivers\display\S1D13706, replacing the original configura-
tion file.
10. Edit the file PLATFORM.REG to match the screen resolution, color depth (bpp), ac-
tive display (LCD/CRT/TV) and rotation information in
MODE.H. PLATFORM.REG is located in x:\wince\platform\cepc\files.
$(_FLATRELEASEDIR)\ddi_vga2.dll
$(_FLATRELEASEDIR)\ddi_vga8.dll
$(_FLATRELEASEDIR)\ddi_s364.dll
$(_FLATRELEASEDIR)\EPSON.dll
Page 5
NK SH
NK SH
NK SH
NK SH
S1D13706
X31B-E-001-04