Verifying The Snmp Access Configuration Status; Viewing The Snmp Trap Receiver Configuration - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Troubleshooting RSTP SNMP traps
Procedure
1. Use the show snmp-server notification-control command to display the
2. Observe the command output display for the status of RSTP-related traps.
3. If required, use the spanning-tree rstp traps command to enable RSTP
4. You can repeat step 1 to confirm the traps are enabled.

Verifying the SNMP access configuration status

Use this procedure to verify that SNMP access is enabled on the IP manager list.
Procedure
1. Use the show ipmgr command to display the IP manager configuration.
2. Observe the command output display to determine if SNMP access is enabled or
3. If required, use the snmp-server enable command to enable SNMP access.
4. You can repeat steps 1 and 2 to confirm the configuration change.

Viewing the SNMP trap receiver configuration

Use this procedure to view and analyze the SNMP trap receiver configuration.
Procedure
1. Use the show snmp-server host command to display the trap receiver
2. Observe and analyze the command output display.
58 VSP 7000 Troubleshooting
status of SNMP traps.
traps.
disabled.
configuration.
Comments? infodev@avaya.com
March 2012