Basic Power Supply Operation
Test connections — Explains how to connect DUT to the power supply output and how
•
to connect an external voltage to the DVM input.
Outputting voltage and current — Explains how to output voltage and current.
•
Output bandwidth — Details Model 2306 output bandwidth control.
•
Output impedance — Details Model 2306 variable output impedance feature.
•
SCPI Programming — outputting voltage and current — Contains SCPI commands re-
•
lated to output voltage and current.
Reading back V and I — Covers the actual V and I display mode, which is used to
•
measure and display the actual voltage and current being delivered to the DUT.
SCPI Programming — measure V and I, and DVM input — Contains SCPI commands
•
related to measuring voltage and current.
Independent voltage measurements (DVM) — Explains how to use the digital voltmeter
•
(DVM) to make DC voltage measurements.
SCPI Programming — DVM — Contains SCPI commands related to DVM
•
measurements.
Sink operation — Explains how to use the power supply to dissipate power, rather than
•
sourcing it.
Programming examples — Provides two examples: one to output and read back voltage
•
and current, and one to measure the DVM input.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
2