Trigger Connections; Trigger Connectors; Figure 6-1 Typical Trigger Sequence; Figure 6-2 Model 2306-Vs Rear Panel Trigger Connectors - Keithley 2302 Instruction Manual

Figure 6-1
Typical trigger sequence
Output
Voltage

Trigger connections

Trigger connectors

The rear panel of the Model 2306-VS shows the trigger connectors
each channel includes a TRIGGER IN and TRIGGER OUT BNC connector. Use only quality
50Ω coaxial cable for all trigger connections to ensure proper operation.
Figure 6-2
Model 2306-VS rear panel trigger connectors
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Trigger Trigger
Out (1) Out (6)
Delay Meas.
Meas.
Delay
(5)
(4)
Step (3)
Trigger
Trigger
In (2)
In (7)
WARNING:
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
OUTPUT #1
SOURCE SENSE
+ _
+ +
IN
CHANNEL 1
MADE IN
U.S.A.
CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
Channel 1
Trigger Connectors
External Triggering (Model 2306-VS Only)
Trigger Trigger
Out Out
Step
Step
Delay Meas.
Trigger
Delay = Programmed Delay
In
Meas. = Measurement Period
Time
ISOLATION FROM EARTH: 22 VOLTS MAX.
DVM IN OUTPUT #2
+30 VDC MAX.
SOURCE DVM IN SOURCE SENSE SOURCE
_ _ _ + _ _
+ + +
TRIGGER
CAT I
OUT IN OUT
CHANNEL 2
LINE FUSE
IEEE-488
SLOWBLOW
2.0A, 250V
LINE RATING
100-120VAC,
200-240VAC
50, 60 HZ
165VA MAX.
Channel 2
Trigger Connectors
Numbered sequence shown
on first step correspond to
steps in "Typical trigger
sequence" (see text).
(Figure 6-2). Note that
DVM IN
_ _
+
6-3