Keithley 2302 Instruction Manual page 105

The three trigger level ranges are displayed as follows using the TRIGGER LEVEL menu
option:
5A Range:
1A Range:
100mA Range:
For Model 2306-PJ (battery channel #1) 500mA current range — The trigger level can
be set for either the 500mA, 100mA, or 10mA range. For the 500mA range, the trigger level can
be set from 0 to 500mA in 0.5mA steps. For the 100mA range, the trigger level can be set from
0 to 100mA in 0.1mA steps. For the 10mA range, the trigger level can be set from 0 to 10mA in
0.1mA steps.
The three trigger level ranges are displayed as follows using the TRIGGER LEVEL mA
menu option:
500mA Range:
100mA Range:
10mA Range:
To toggle the range for the trigger level, place the blinking cursor on the "A" at the far right
end of line two of the display, and press the
amps), press ENTER to update the displayed range for that trigger level setting only.
Charger Channel (#2) — Set the trigger level from 0 to 5A in 5mA steps.
Trigger level range
TRIGGER LEVEL RANGE is a battery channel (#1) setting only. Use to specify the trigger
level range. On the 5A current range (Models 2306, 2306-VS, and 2306-PJ), possible Trigger
Level Ranges are:
5A FULL SCALE
1A FULL SCALE
100mA FULL SCALE
For the 500mA current range (Model 2306-PJ), using the TRG LEV mA RANGE menu
option, possible trigger level ranges are:
500mA FULL SCALE
100mA FULL SCALE
10mA FULL SCALE
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Long Integration Measurements
LINT TRIG LEVEL #1
A (5.0) 0.000A
LINT TRIG LEVEL #1
A (1.0) 0.000A
LINT TRIG LEVEL #1
mA (100) 0.0000A
LINT TLEV mA #1
mA (500) 0.0000A
LINT TLEV mA #1
mA (100) 0.0000A
LINT TLEV mA #1
mA (10) 0.0000A
and key. After keying in the trigger level (in
(0–5A)
(0–1A)
(0–100mA)
(0–500mA)
(0–100mA)
(0–10mA)
4-9