Keithley 2302 Instruction Manual page 207

Table 12-4 (cont.)
SENSe command summary (refer to Tables 2-3, 3-2, and 4-2) (cont.)
Command
:SENSe[1]
:PCURrent
:SYNChronize
:TLEVel
[:AMP] <NRf>
[:AMP]?
:ONE <NRf>
:ONE?
:MILLiamp
<NRf>
:MILLiamp?
:HALFamp
<NRf>
:HALFamp?
:HUNDred
<NRf>
:HUNDred?
:TEN <NRf>
:TEN?
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Description
Trigger level:
Set trigger level (in amps) for 5A range on 5A
current range: 0.0–5.0.
Query setting for trigger level on 5A range.
Set trigger level (in amps) for 1A range on 5A
current range: 0.0–1.0.
Query setting for trigger level on 1A range.
Set trigger level (in amps) for 100mA range on 5A
current range: 0.0–0.1.
Query setting for trigger level on 100mA range.
Model 2306-PJ only — Set trigger level (in amps)
for 500mA range on 500mA current range: 0-
500mA
Model 2306-PJ only — Query the 500mA trigger
level setting on the 500mA current range.
Model 2306-PJ only — Set trigger level (in amps)
for 100mA range on 500mA current range: 0-
100mA
Model 2306-PJ only — Query the 100mA trigger
level setting on the 500mA current range.
Model 2306-PJ only — Set trigger level (in amps)
for 10mA range on 500mA current range: 0-
10mA
Model 2306-PJ only — Query the 10mA trigger
level setting on the 500mA current range.
SCPI Tables 12-9
Default
SCPI
parameter
0.0
0.0
0.0
0.0
0.0
0.0