Keithley 2302 Instruction Manual page 205

Table 12-4 (cont.)
SENSe command summary (refer to Tables 2-3, 3-2, and 4-2) (cont.)
Command
:SENSe[1]
:PCURrent
:TIME (cont.)
:HIGH?
:LOW <NRf>
:LOW?
:AVERage <NRf>
:AVERage?
:DIGitize <NRf>
:DIGitize?
:STEP <b>
:STEP?
:UP <NRf>
:UP?
:DOWN <NRf>
:DOWN?
:TIME <NRf>
:TIME?
:TimeOUT
<NRf>
:TimeOUT?
:INITial <NRf>
:INITial?
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Description
Query high integration time.
Specify integration time (in sec) for low pulse
measurements (33.33E-06 to 0.8333) — accounts
neither for internal trigger delay nor user delay.
Query low integration time.
Set integration time in seconds for measurement of
pulse AVERage time — accounts neither for
internal trigger delay nor user delay.
Query average integration time.
Specify integration time (in sec) for digitizing or burst
measurements; 33.33e-6 to 0.8333.
Query integration time for digitizing or burst
measurements.
To perform a series of step measurements, set to ON.
Query state for performing step measurements.
Specify number of UP steps <0-20> (max is for both
up and down combined).
Query number of UP steps specified.
Specify number of DOWN steps <0-20> (max is for
both up and down combined).
Query number of DOWN steps specified.
Specify step integration time for UP plus DOWN
steps: 33.3µsec–100msec.
Query step integration time specified for UP plus
DOWN steps.
Step TimeOUT (other than the first step):
2msec–200msec.
Query step TimeOUT setting for all steps but the first
step.
TimeOUT for the first step: 10msec–60secs.
Query TimeOUT setting for the first step.
SCPI Tables 12-7
Default
SCPI
parameter
3.333E-05
3.333E-05
3.333e-5
OFF
1
1
200μsec
2ms
2sec