Table of Contents
Advertisement
Table 12-7
SYSTem command summary (refer to System subsystem in Section 11)
Command
:SYSTem
:VERSion?
:ERRor?
:CLEar
:LFRequnecy?
:POSetup <name>
:POSetup?
:MEP
[:STATe] <b>
[:STATe]?
:AZERo
:STATe <b>
:STATe?
:TRIGger
:TALK
:BOTH <b>
:BOTH?
:CONTinuous <b>
:CONTinuous?
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Description
Query SCPI version level.
Read and clear oldest message in error
queue.
Clears error queue.
Query power line frequency setting.
Select power-on setup: RST or SAVx,
where:
x = 0 to 4 (2306)
x = 0 to 2 (2306-PJ, 2306-VS)
Query power-on setup.
Path to select GPIB protocol.
Select 488.1 (OFF) or SCPI (ON)
protocol.
Query selected protocol.
Path to control auto zero.
Enable (ON) or disable (OFF)
auto zero.
Query auto zero state.
Path to trigger commands
Path to talk commands.
Set <b> to 1 (or ON) to enable 2
reading trig on talk. 0 (or OFF)
disable 2 reading trig on talk,
but reads the active channel:
CH1: READ1?
CH2: READ2?
Query trigger on talk.
Set <b> to 1 (or ON) to enable trig-
ger continuous mode which
automatically turns display
OFF. 0 (or OFF) disables mode
and automatically turns dis-
play back ON.
Query trigger continuous mode.
SCPI Tables
Default
SCPI
parameter
RST
ON
ON
OFF
OFF
12-19
Hide quick links:
Advertisement
Table of Contents
