Keithley 2302 Instruction Manual page 218

12-20 SCPI Tables
Table 12-8
Model 2306-VS external trigger command summary (refer to Section 6)
Command
TRIGger[1]
:EXTernal
:BOTH <name>
:BOTH?
:EDGE
:IN <name>
:IN?
:OUT <name>
:OUT?
:ENABle <b>
:ENABle?
:INIT
:STEP
<NRf1>,<NRf2>,<NRf3>
:STEP? <NRf>
:STEP?
:VOLTage <b>
:VOLTage?
:END <NRf>
:END?
:READing <name>
:READing?
:POINts <NRf>
:POINts?
:VPT <b>
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Description
Trigger subsystem for Channel #1 (battery channel):
Path for external trigger control.
Select channel both control type (NONE,
VOLT, or AUTO).
Query channel both control type.
Path for specifying the trigger in & out pulse
edges for a channel.
Select trigger in pulse polarity (RISING or
FALLING).
Query trigger in pulse polarity.
Select trigger out pulse polarity (RISING or
FALLING).
Query trigger out pulse polarity.
Enable (ON) or disable (OFF) external trigger
feature.
Query external trigger feature state.
Initialize channel to take another set of
STEP:POINts measurements.
Set voltage step parameters; step # (1-20),
voltage (0-15), delay (0-5).
Query voltage and delay for a given step
number.
Query next step to be completed upon detection
of the trigger in pulse.
Enable (ON) or disable (OFF) voltage step
feature.
Query voltage step state.
Set voltage value when external trigger
turned OFF (0-15).
Query trigger OFF voltage.
Set reading/measurement mode (NONE,
SYNC or AUTO).
Query reading/measurement mode.
Set # of measurements and/or voltage steps
(1-20).
Query # of measurements and/or voltage
steps.
Enable (ON) or disable (OFF) Voltage
Protection Tripping.
Default SCPI
NONE
FALLING
FALLING
OFF
Step 1-
20,
0V step,
0s delay
OFF
0
AUTO
1
ON