Getting Around The Menu - Keithley 2302 Instruction Manual

Getting around the MENU

• Press the MENU key to activate the menu.
• Use the
• Changing channels: When the main menu is displayed, use the
the active channel (each press of the
Channel #2).
NOTE
If a channel number is not shown, the
and
(not on the charger channel).
• The active channel may be changed in the main menu, and the top sub-menus for pulse
current and long integration. The active channel cannot be changed in all other
sub-menus.
• Select the displayed primary menu item by pressing ENTER. With PULSE CURRENT
or LONG INTEGRATION selected, use the
(Again, pressing ENTER selects the displayed item.)
NOTE
Before pressing enter, make sure the desired channel is active. If ENTER is pressed
with the incorrect channel selected, press the MENU key (to cancel changes), use
or
primary menu item.
• Display and change settings and selections (for a menu item) using the edit keys
(
For a setting, use
keys to increase or decrease the value (unless noted otherwise).
Rapid jump to minimum or maximum: To rapidly jump to the maximum value,
increment the most significant digit (the left further-most digit). (Note that if the tens
digit is the most significant but is not displayed, place the cursor to the left of the
units digit.) To rapidly jump to the minimum value, decrement the first leading zero
(or tens digit if there is not a leading zero).
For a selection, use the
otherwise).
• With the desired setting or selection displayed, press ENTER for it to take effect.
Pressing MENU will cancel the edit operation.
• Use the MENU key to back out of the MENU structure.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
and keys to scroll through the primary menu items.
key presses will be ignored if a sub-menu only exists on the battery channel
to toggle to the desired channel, and then press ENTER to select the displayed
):
or to place the cursor on the desired digit, then use the
or
and keys will toggle between Channel #1 and
and key presses will be ignored. Also the
and keys to display the secondary items.
keys to display the desired option (unless noted
Getting Started 1-17
and keys to change
and