Scpi Command Subsystems Reference Tables - Keithley 2302 Instruction Manual

12-2 SCPI Tables

SCPI command subsystems reference tables

Tables 12-1 to 12-8 summarize the commands for each SCPI subsystem. The following list
includes the table numbers and page numbers for each SCPI subsystem command summary.
Table TitlePage
12-1
12-2
12-3
12-4
12-5
12-6
12-7
12-8
General notes
• Brackets ([ ]) are used to denote optional character sets. These optional characters do not
• Angle brackets (<>) are used to indicate parameter type. Do not use angle brackets in the
• SCPI — A checkmark ( ) indicates that the command and its parameters are SCPI
• Refer to Section 7 for GPIB operation.
• Refer to Section 9 for common commands.
• Refer to table title for more command information.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
DISPlay command summary............................................
FORMat command
OUTPut command summary.............................................12-5
SENSe command summary...............................................12-6
SOURce command
STATus command summary............................................12-17
SYSTem command
Model 2306-VS external trigger command
have to be included in the program message. Do not use brackets in the program message.
program message.
confirmed. An unmarked command indicates that it is a SCPI command but does not
conform to the SCPI standard set of commands. It is not a recognized command by the
SCPI consortium. SCPI confirmed commands that use one or more non-SCPI parameters
are explained by notes.
summary............................................12-4
summary..........................................12-16
summary..........................................12-19
summary.....12-20
12-3