Wireless Dect (Sip); Table 2-144 Supported Wireless Dect (Sip) Features - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
With Version 4000 (4.01 or higher) software, the SIP DECT handset can display the calling name on
an inbound call. This priority is fixed in system programming. With Version 4000, Program 15-05-17
is no longer used.
With Version 5000 (5.00 or higher) software, Off-hook signaling and Caller ID display after a call
transfer has been added.
With SV8100 Version 5000 (5.00 or higher) software and PZ-IPLB daughter board installed, half
duplex connections are not supported. For troubleshooting purposes, a managed switch capable of
port mirroring is required to capture packet data from the SV8100 IPLB Ethernet port.
Description
The Wireless DECT (SIP) (Digital Enhanced Cordless Telecommunication) system allows using DECT
6.0 DECT (SIP) handsets. These handsets provide the freedom and convenience of a wireless
telephone but also allow access to features provided by the UNIVERGE SV8100 system.
The number of Wireless DECT (SIP) handsets supported by the UNIVERGE SV8100 is dependant on
the number of SIP Client licenses.

Table 2-144 Supported Wireless DECT (SIP) Features

Wireless DECT (SIP).

Feature Name
Alphanumeric Display
Call Duration Timer
Call Forwarding
Call Waiting/Camp-On
Wireless DECT (SIP)
Table 2-144 Supported Wireless DECT (SIP) Features
SIP DECT
Wireless DECT (SIP)
lists the SV8100 features supported on the
Comments SIP DECT
Yes IP Dect Handsets have Alphanumeric Display
and are backlit. However, the display is not
updated with CPU messages
Yes SIP DECT handset timer not system timer.
Yes Must be programmed in 24-09 or through
feature code in handset.
Yes Cannot set camp-on from IP DECT handset.
Can only set camp-on to IP DECT handset from
softkey menu of multiline terminal, not with
access codes.
Issue 11.0
2 - 1971