Table 2-141 Embedded Vrs Prompts - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

To listen to a message left by an outside caller:

Press Speaker or lift the handset.

At a Single Line Telephone, lift the handset.

Dial 5 (Listen).

Dial the VRS message number to which you want to listen (091~100).

You hear the message left by the outside caller. If you hear a beep instead, no message is recorded.

to hear the message again.

To hear another message, dial 5 and then enter the message number (091~100).

To delete the message, dial 3, enter the message number (091~100), press

The number you have dialed is not in service.

Vacant number.

Your call cannot go through, please call the operator.

Please do not disturb.

Please hold on, your call is being rerouted.

Please enter an account code.

Recording finished.

Your call has been forwarded.

Start recording at the tone and press the POUND key

when you are done.

Voice Response System (VRS) Embedded VRS

Table 2-141 Embedded VRS Prompts

Dial a service code for a feature that is not allowed by the station

Class of Service.

Dial an extension number which does not exist.

Dial an outgoing number which is not allowed by Toll Restriction.

Dial an extension number which is in DND.

Dial an extension number which is set for Call Forward Off-Premise.

Make an outgoing call from a telephone which requires an Account

Record a VRS message and press

Setup the Call Forwarding and receive a call to the telephone.

Perform the VRS recording.

and hang up.

How can I listen to this?

when finished.

Table of Contents