NEC Univerge SV8100 Features And Specifications Manual page 1958

Issue 11.0
Program
Program Name
Number
25-04-01 VRS/DISA Transfer Ring Group
With No Answer/Busy
25-05-01 VRS/DISA Error Message
Assignment
25-06-01 VRS/DISA One-Digit Code
Attendant Setup – Next
Attendant Message Number
25-06-02 VRS/DISA One-Digit Code
Attendant Setup – Destination
Number
2 - 1926
Description/Comments
Set the destination that Automated
Attendant (OPA) calls ring if the
OPA caller dials an extension that
does not answer or is busy. This
also sets the options for DISA
calls. The system allows Ring
Groups or Disconnect.
For each trunk answered by VRS,
enter the VRS message (1~100)
the outside caller hears if they dial
incorrectly after answer. If you
enter 0, the call reroutes according
to Program 25-03 and Program
25-04. Make one entry for each
Night Service mode.
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed
to answer outside calls (see
Program 25-02-01), specify the
digit the Automated Attendant
#
caller dials (1~9, 0, , ). (Keep in
mind that if you assign
destinations to digits 3 and 4,
outside callers cannot dial system
extensions.)
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed
to answer outside calls (see
Program 25-02-01), specify the
destination reached (eight digits
maximum) when the caller dials
the single digit code.
UNIVERGE SV8100
Assigned Data
1
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring

Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
0~100 (0 = No Setting)
(default = 0)
0~100 (0 = No Setting)
101 = Voice MAil
Answers
104 = Refer to 25-04:
VRS/DISA Transfer
Ring Group with No
Answer/ Busy
105 = Dial the other
extension
(default = 0)
Up to eight digits
(default not assigned)
Voice Response System (VRS)
Level
2 3


